House Mouse Wiper card

A while ago someone gave me some House Mouse stickers. They really are good because when they are stuck onto something only the picture shows, not the peel off edges or background paper. It's almost like a  ready-coloured stamp!

I wanted to make a special sort of project with them too so I chose a "Wiper! card (so called because of the windscreen wiper motion of the pop up insert)
It comprises of 2 pieces of card measuring 11.5cm x 17cm. Each piece is scored at 12.5cm and 14.5cm. Turn 1 piece of card around so that the score lines are at the opposite end.
Cut a small piece of card for the mechanism measuring 3cm x 10cm. Stamp or stick required greeting on the top. Measure 1.8cm from the bottom left hand corner up and from the same corner along. Join the 2 points forming a triangle.  Score this line and fold it towards you.
Working on the larger card with the score lines on the left, stick the triangle on the little card (and only the triangle!) 3cm down inside the first score line. It's a good idea to use wet glue for this because it's stronger.
Apply glue up to the same fold and stick the unfolded edge of the other larger piece of card on top. Repeat on the opposite edge, gluing front to back. Decorate the narrow sections either side of the main card with coloured strips of paper or peel-offs. (I'm sure there will be better instructions than these on the net if you have a look!)

Once the glue is dry, you should be able to push and pull the card to make the Wiper part pop up.
Good Luck and Happy Crafting! Pat x

3D no more!

Multi-layers were very popular at one time but with the added postage for extra thick cards nowadays, that's not the case any more. I still have a few papers that I want to use though, so I decided to make them up minus the 3d effect. I stuck all of the layers together and glittered the edges to make them stand out. Simple!
It looks quite pretty and I really like the effect. Why not have a go and see what you think?

Bye for now....

"Celebrate in Style" stamp

When I first had this stamp I couldn't find any inspiration on the web at all. So, I just had to come up with something myself.

First I stamped the image onto a piece of paper and cut it out. I stamped the same image onto the centre of the card, then covered it with the mask and stamped one to the left and one to the right. I then removed the mask and coloured the ladies in.

I took a piece of acetate half a centimetre longer than the card and the same width. Then I cut 2 strips of brown card 2cms wide and deckled the edge. I folded each strip down the middle. I stuck the acetate onto one of the strips up to the fold then applied it to the main card on the left hand side. I applied peel offs to the back of the acetate (so that they wouldn't come off easily) 1cm from the top and the bottom and 2.5cms in from each side (starting at the fold line on the brown card on the left) The easiest way to get a straight line is to use the grid on a cutting mat as a guide.

I then stuck half of the brown strip to the right hand side of the card (only) Once the glue had dried, the acetate was fed inside the lip on the strip of brown card on the right to create a sort of window. This gives the card a 3d feel and the acetate can be taken out of the "lip" for postage. (You'll probably have to slip a little note to the recipient so that they know where to put the acetate when they receive the card but still.......)

The greeting was stamped  and cut out in a bubble - style shape, then applied onto the card itself, at the front of the ladies, with 3d pads.

Hope you'll try this style of card for yourself and have a little fun with it.

Till next time
Happy crafting
Pat x